2.4G wireless bridge, designed for elevator scene, Max. bandwidth upto 300Mbps, Max. Transimission distance 500 meters, a pair included in the package.
ABOUT
Wireless | ||
---|---|---|
Standard: | IEEE802.11 b/g/n(2T2R 300Mbps) | |
Operation frequency: | 2412 to 2472 MHz(More Non-standard channels is availability,2312MHz to 2732MHz) | |
Antenna: | Internal, 6dBi, H: 65° V: 60° | |
Max output power: | 27dBm | |
Receive sensitivity: | -72dBm@65Mbps, -97dBm@1Mbps | |
Max transmission rate: | 11n: 300Mbps(HT40)/130Mbps(HT20) 11g: 54Mbps |
Hardware | ||
---|---|---|
Power supply: | 48V/0.25A PoE or 12 VDC | |
Interface: | 3×10/100M Base-TX (Cat. 5/5E, RJ-45) ports | |
Operation temperature: | -30℃ to 65℃(-22℉ to 149℉) | |
Storage temperature: | -40℃ to 85℃(-40℉ to 185℉) | |
Operation humidity: | 5% to 95%RH non-condensing | |
Dimensions: | 150×150×31.6 mm (5.9×5.9×1.24 inch) |
Software | ||
---|---|---|
Application scenarios: | Elevator Room/IP Camera | |
Encryption: | WPA-PSK/WPA2-PSK | |
Network mode: | Router/Bridge | |
Security: | IP/MAC filter, SSID hidden, Interface Isolation | |
Network protocol: | TCP/UDP/ARP/ICMP/DHCP/HTTP/NTP | |
TDMA: | Supported (Extend private communication protocol) | |
Auto ACK timing adjust: | Supported (It can automatically detect the distances of the devices, keep the performance always the best) | |
Management and Logs: | NTP, Syslog, Telnet, AC | |
Web based configuration: | Supported | |
Firmware update: | Support update firmware by Web page | |
Bandwidth: | 20M/40MHz |